Concrete Masonry Units

   Standard

   Ground Face

   Split Face

   Single Score Split Face

   Smooth Center Score

   Manhole, Catch Basin

Retaining Walls

   Country Manor

   Arbor Stone

   Standard II / Compac II

   Potenzo Stone

   Verazzo Stone

   Installation Instructions

   Specifications

   Grills by NC

Pavers

   Dublin Cobble

   Bergerac

   Cambridge Cobble

   Holland Stone

FAQ's

STEP ONE:

Prepare the site.
Start by digging a shallow trench 4" (100mm) deep by 12" (300mm) wide. Cut through and remove any sod, roots or large rocks. For organic loam soils, dig 4" (100mm) deeper and add a leveling pad of sand or gravel. Now compact and level the soil to receive the first course of landscape units

STEP TWO:

Set the base course.
Place and level the first unit with the retaining lip down. Level each additional unit as you place it, making sure that the outside edges touch. If your wall contains both straight and curved areas, start with a straight area and build into the curves. Complete the base course before proceding to the second course.

STEP THREE:

Stack and fill. Starting with straight areas first, begin placing the second course. Center each unit on the seams of the course below in a running bond pattern as shown. To maintain proper spacing on curves, remove the outside edges of the retaining lip as required. Now proceed to the next layer, backfilling as you go. For drainage behind the wall, clean gravel or crushed stone is recommended.